Special sludge dryer
Brief introduction of sludge dryer:
Changzhou Lima Drying Engineering Co., Ltd. specializes in designing and manufacturing sludge dryers for industries: printing and dyeing, papermaking, biology, electroplating, thermal power, chemical and sewage treatment plants. Generally, the initial water content of the sludge after dehydration is 80%, and the final water content after drying is 10% to 50%. Generally, the sludge is required to be about 30%. The dry sludge becomes loose powder and can be mixed with coal powder to directly enter the boiler for combustion. The heat value of the sludge is about 1500-2000kcal, which can be used for waste and save energy. Some sludge can be made into fertilizers and building materials after drying, or the direct landfill will not cause secondary pollution and turn waste into Bao, can fully meet environmental protection requirements. This equipment has low energy consumption, and the heat source can be heated by steam, heat transfer oil, hot air, flue gas, etc. (evaporating 1 kg of water consumes 1.1 to 1.3 kg of steam). It has low power consumption and stable operation. , Low noise, small labor and other advantages, basically fully automatic production.
At present, the company's awareness of environmental protection is increasing day by day, and sludge is a common problem that plagues the development of enterprises. Changzhou Lima Drying Engineering Co., Ltd. introduces advanced foreign sludge drying technology and combines special sludge dryers made in China with actual conditions. It has met the requirements of industry customers, and has been trusted and cooperated by more and more companies. It has cooperated with more than 50 large, medium and small enterprises in China. Our company will use superb technology to better serve you and work together. Advance and create a green earth.
Technical parameters of sludge dryer:
Capacity (24 / h per day)
Transmission power (kw)
6000 × 1200 × 2000
6770 × 2000 × 2000
7000 × 2000 × 2000
9310 × 2000 × 2500
Note: 1. Initial moisture of wet sludge: ~ 80%, final moisture of dry sludge: ~ 43%
2. Thermal oil (250 ℃)
Next: Coffee production line